Your grease trap separates fats and food solids from wastewater, but the collected material takes up space over time. If it builds up around the outlet, grease can pass farther into the drainage system and sinks may drain slowly. A pump-out removes the accumulated contents so the trap has room to separate wastewater again. Call to describe what is happening in your kitchen to a provider who works in your area.
Call (279) 356-5933 to reach a provider →
What a pump-out removes
A pump-out removes the contents of the trap, including the grease floating on top and the food solids settled at the bottom.
The liquid between those layers is removed too. Ask whether the service also includes scraping the walls and baffles and checking the outlet tee for buildup.
- Floating fats, oils and grease
- Wastewater held inside the trap
- Settled food particles and sludge
The 25 percent rule and how frequency is set
Many local authorities use the 25 percent rule as a guide. It calls for pumping before floating grease and settled solids together reach 25 percent of the trap's total liquid depth.
How quickly those layers build depends on your menu and kitchen activity. A fryer-heavy kitchen may reach that point in a couple of weeks, while a light-prep kitchen may take much longer.
Your city or sewer district sets the schedule that applies to your kitchen. Track buildup and service dates to help plan pump-outs around those requirements.
What the provider should leave you
Ask the provider what service records you will receive after the pump-out. Keep them where you can find them for an inspection or when planning future service.
- A waste manifest documenting removal and disposal
- A service log entry with the date
- The amount of waste removed, if recorded
- Notes on buildup or problems with trap parts
Compare each new record with the previous one so you can spot changes in buildup and keep a clear history of the trap.
Signs you are overdue
- Standing water in the sink or drains that empty more slowly than usual
- Grease odors around the trap or nearby floor drains
- A thick layer of grease visible inside the trap
- Food solids accumulating near the bottom or around the baffle
- Grease appearing downstream in a sample box, where your system has one
These signs can mean the trap needs attention, though slow drainage can also come from a blocked line. Check your service records and the buildup inside the trap.
What happens to the waste after pumping
The removed grease, wastewater and solids are hauled away for handling at a facility that accepts grease trap waste. Treatment or disposal methods depend on the facility and the material collected.
Ask where the waste will go and request a manifest or other disposal record. Keep that document with your service log so you can show what was removed and where it went.
What affects the price of a pump-out
The size of the trap or interceptor and the amount of material inside can affect the price. Access matters too: an indoor trap beneath equipment or an interceptor with a hard-to-reach lid may require different work. The service scope, including scraping walls and baffles or handling heavy buildup, can also affect the quote. Ask what is included and whether access or disposal is charged separately.
Grease trap pumping questions
How do I know when my trap was last pumped?
Check your service log, waste manifest or past invoices for the most recent date. If those records are missing, ask the company that previously serviced the trap for a copy.
Does pumping include cleaning the walls and baffles?
Service scopes vary. Ask whether the pump-out includes scraping the walls and baffles and clearing buildup around the outlet tee. A full description helps you understand what work is planned.
Can I set up a recurring pumping schedule?
Ask a provider about recurring service based on your kitchen's buildup and the schedule set by your city or sewer district. Keep your pump-out documents and adjust the plan if grease and solids accumulate sooner than expected.
Do I need to be on site during the pump-out?
Ask the provider what access is needed and whether someone must be present. Make sure the trap or interceptor lid can be reached and that whoever is on site knows where the service log is kept.